Sometimes a measurement length may only be shown once on the drawing, but have a note calling for multiples of that item. EG: a note stating "2x runs of 100mm tray".

With our measurement multiplier you can measure it once, and then add a multiplier.

  1. Select the measurement heading you want to multiply

  2. Under the Multiplier column, enter a number to multiply that specific length by

  3. Press "Enter" or click outside the length multiplier field to confirm the value

  4. Click "Save" to save your changes (Shortcut = A)

2021-02-11 15.04.08


Learn more

How to: Use the zone multiplier.

Did this answer your question?